HD camera mount for Peon230 - 25 degrees
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 25 degree mount for any GoPro-like sized camera for Peon 230.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 1010
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is 25 degree mount for any GoPro-like sized camera for Peon 230. You can directly screw this to the top plate using the existing holes. You can also add rubber dampers inbetween the mount and the top plate to decrease camera vibrations.
This is 3rd version of this mount and has survived a dozen of crushes without breaking. Everytime previous version broke, I improved the weak point, so this should be able to take some beating.
Print either with flexible material to further improve vinbrations dampening or something like very strong like PETG. Whatever your settings are, the part should end up <20g unless you go with 100% infill, which is overkill for this part.