Buildplate Endstops for Qidi X-Plus 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Endstops for 3rd party buildplates on Qidi X-Plus 3
- Ocena
- 4 / 5
- Polubienia
- 35
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 1471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
For the last few weeks I've been annoyed that 280x280 buildplates are only available from Qidi and not from third party.
But now I have found a solution to my problem.
There is a plastic cover around the heatbed that is not needed and can be removed. After removing it, a normal 300x300 buildplate fits without getting in the way. Since I don't want to have to be careful every time I attach the plate, I printed 2 adjustable endstops. The endstops use the plastic cover screws + 2 washers and are adjustable depending on the buildplate used. Since it gets quite warm so close to the heatbed, you should use an appropriate filament. I used Qidi PET+CF for this.
I printed with 0,2 layerheight,4 walls and supports enabled.