1 / 3
Aurebesh LED wall sign
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED wall sign of MAKE in Aurebesh (Star Wars language)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
Allows running LED strips along the vertical walls, with holes between each letter for connecting them together.
I used an ESP8266 for the controller and WS2812B LED strips (202 LEDs in total).
TIPS:
- I did 30 pixels/meter, but I think something denser would have turned out looking a bit nicer.
- The adhesive on my LED strips isn't great (in the bottom of the K and E you can see it peeling up), I have tried using double sided tape in some spots, and that helps a bit
- At some point I would like to try to cut paper to go along the floor of each letter as I have heard that can help with the diffusion.
- In order to hold the cover in place (the white sections in my pictures) I used some poster tack.