1 / 6
Spacer for waveshare 4DOF metal robotic arm — zdjęcie 1
1 / 6

Spacer for waveshare 4DOF metal robotic arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Little spacer to align the clamp gears of robot arm kit

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I had bought this kit some time ago, never used it because the two gears of the clamp would not align, hence not working. The spacers/washers provided would just not add up to the correct height.

https://www.waveshare.com/robot-arm-for-pi.htm

Hence designed this washer, added this side wedge so that the square part fits the base of the clamp system, where the cylindrical pad allows the clamp part to rotate. Being at 9mm would make sure that the clamp stays even to the plane, making contact with the other part.

Tagi