Prusa XL series: Filament insertion guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Filament guide for the Filament Sensor (or others). Never again have problem inserting the Filament.
- Ocena
- 4,857 / 5
- Polubienia
- 126
- Pobrania
- 613
- Wydruki
- 36
- Wyświetlenia
- 1750
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After seeing the Funnel from Marobi1958 i thought that it is actually a good idea for inserting Filament easier. I just had improvement ideas. The opening is more agressiv, which should allow easier insertion. The PTFE side is pressfittet. Also the mart is designed to not need support.
Should be printed with 0,25mm nozzle and with the ptfe side up.
A Brim would be helpfull
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114