1 / 6
API 4WW Water Wiggler Replacement Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
API 4WW Water Wiggler Water Agitator for Bird Baths
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I own a couple API 4WW Water Wiggler Water Agitator for Bird Baths and the raccoons are always chewing up the floats and the little plastic mount. I designed these replacement parts based roughly on the original parts, but tweaked them a bit to my liking. Specifically I made the floats larger, so they produce larger ripples in the water.
Here is a link to the onshape files if you want to make any modifications.
- Make sure to print the floats with less than 100% infill so they float better. I printed them at .3mm layer height.
- The mount can be printed with any infill, but make sure to do a few solid top and bottom layers and several walls for strength. I printed it at .2mm layer height.
- The metal arm should be a tight fit in the mount, but the floats should slide easily.
PETG would be better than PLA since they tend to be in the sun. I suppose ABS would be ideal, but I don't print that at the moment.