1 / 3
Fountain head with 1cm fitting for solar pond pumps — zdjęcie 1
1 / 3

Fountain head with 1cm fitting for solar pond pumps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fountain head for solar pond pump with 1cm diameter pipe/fitting.

Ocena
0 / 5
Polubienia
6
Pobrania
76
Wydruki
0
Wyświetlenia
499
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The stock supplied heads where kind of boring and in black plastic which blocked the LEDs that where supplied with my pump.
This design spreads the water in an interesting pattern and lets the LEDs light up the water streams much better when printed with transparent material than using the stock ones.

Printed with a raft and used a 1mm drill bit to clean the tiny pipes.

Update 20240115: Fixed mesh errors in .stl file

Tagi