XL Pi Cam V3 Snap-On Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Camera V3 mount for Prusa XL. Snap-on design, but can be fixed with a screw too.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 448
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Raspberry Pi Camera V3 mount for Prusa XL.
Camera angle is optimized horizontally to cover the entire bed.
Parts
- 1x Raspberry Pi 3B/4B
- 1x Raspberry Pi Camera V3 (Wide angle version recommended)
- 1x Pi3B/4B case (+Fan) by ywabiko | Download free STL model | Printables.com
- 1x 200mm Raspberry Pi camera flat cable
- 1x (optional) M4x30mm machine screw.
- If you don't use the Pi holder, M4x20mm is sufficient.
File to Print
- Without fan → XLPiCamV3MountALL.3MF
- With fan → XLPiCamV3MountALL_WithFan.3MF
Recommended Print Settings
- Layer height 0.2mm
TLDR
Raspberry Pi Camera V3 comes with 4 variants.
- Standard angle (75-degree), with IR filter
- Wide angle (120-degree), with IR filter
- Standard angle (75-degree), without IR filter.
- Wide angle (120-degree), without IR filter.
Wide angle version is highly recommended here. Its minimum focal length (50mm) works pretty well, i.e. it can auto focus to close models just fine.
Standard angle version kind of works too, but its minimum focal length (100mm) could be an issue if you put your models in the front area of the bed, i.e. camera will be a bit too close ending up with blurry images. If you avoid front area usually, it should be fine.
Fusion 360 files are posted too for easier remix. Enjoy!