Hueforge LOTR map
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForged this classic map from Lord of the Rings!
- Ocena
- 5 / 5
- Polubienia
- 213
- Pobrania
- 732
- Wydruki
- 7
- Wyświetlenia
- 4506
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
To print this model you will either need a multi color printer, or to manually do some color swaps. There are some great tutorials on youtube for manually swapping colors.
I printed this on an X1c BambuLabs printer with an AMS. If using Bambu Studio, the 3mf file should load nicely, otherwise just grab the .stl and add the height range modifier. The filament and color swap information is below. Similar colors should work fine if you don't have the exact ones.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Orange Transmission Distance: 5
PLA+ Esun Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #13 (1.16mm) swap to Orange
At layer #18 (1.56mm) swap to Yellow
At layer #21 (1.8mm) swap to Jade White for the rest.