Mazda MX-5 (Miata) cabin filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cabin filter for Mazda MX-5 to replace the factory wire filter.
- Ocena
- 4,5 / 5
- Polubienia
- 60
- Pobrania
- 766
- Wydruki
- 2
- Wyświetlenia
- 3454
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I made this to replace the factory wire “filter” because I got some leaves and other tree parts in my fan after 20 years.
You need to remove the factory piece to install this and probably clean its remnants with a dremel. (The wire is spot welded to the inlet in 4 places, easy to snip off to begin with)
Needs a filter material, some M3 screws and tapping for the screws.
For installing you should remove the wipers and plastic covers under the windshield.
The housing body has a groove on the bottom that should fit over the inlet. I put some silicone in that groove before pushing it on the sheet metal.
Made it for my NB (2nd gen) but might fit NA (1st gen) as well