Jumper Wire Sorter (Steckbrückenkabel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jumper Wire Sorter (Steckbrückenkabel)
- Ocena
- 4,5 / 5
- Polubienia
- 38
- Pobrania
- 258
- Wydruki
- 5
- Wyświetlenia
- 1047
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you know that problem: Your whole developer table is a mess and you have no reliable sorting system for your Dupont jumper cables you always need in every arduino or raspberry project.
This is why we had a look at the different types of cables and took the most common ones out:
- Male - Male
- Male - Female
- Female - Female
The most common lengths are ~10cm and ~20cm.
You can print these sorters in PLA because there is not much power onto the nose-pieces because of their rounded down shape.
As you can see on the pictures we also used different filament COLORS for each TYPE of cable. So everybody in the company will find the same type of cable in every designer room. If we need a cable with male-female cable Dupont connector we just watch out for a YELLOW assortment. Works well.
Have fun!
Material: PLA
Layerheight: 0,2mm
Infill: 25%