Zoo Tycoon Cards (sleeved)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you like your cards sleeved or just tucked in a box, this could be a good solution for you. I've only tested with…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 99
- Wydruki
- 3
- Wyświetlenia
- 815
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
If you like your cards sleeved or just tucked in a box, this could be a good solution for you.
I've only tested with Arcane Tinmen board game sleeves, Matte version.
This is an addition to the enclosure tiles trays from NightBlade, you can find them here: https://www.thingiverse.com/thing:6270503
Print as followed:
- 4x Cards_Large
- 1x Cards_Small
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Infill:
10%
Filament:
Filright PLA
Notes:
For the Large cards box, set the top and bottom layer to 0 and infill to 20% if you want to have the grid pattern (as seen on the photos) in it.
Category: Toy & Game Accessories