Savage MK ll ( MKii) Magazine Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a mag holder that I liked so I designed my own
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find a magazine holder for my Savage Mk ll magazines so I designed my own
Because of the way the mags are designed there is a lot of variances in the over all thickness due to the staked tabs. I went middle of the road in the thickness of the mags… If your mags are really tight you could sand/file away some of the material or just make the model ticker in your slicer.
I did both single mag and 4 mag models for the factory Savage magazines. The short holders are for the 5 round magazines and the tall are for the 10 round. The shorts will also fit in the tall version. I made them closed bottom to help keep the magazine feed lips from getting bent.