LED-Beleuchtung Anycubic Mega X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thank you Hiob for your post. I took your idea and created a new designet variant of it.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank you Hiob for your post. I took your idea and created a new designet variant of it.
I used 12V "YourLED Eco Basic" by Paulmann and some electronic stuff for the switch.
I chose 12V because I can connect the LED-Light also with the power adapter of the printer.
But I read many post, that the power adapter of the Mega X is sometimes a little weak. So I preferred to connect it with the normal power connection.
I also created little connectors at the profiles ends to be sure that the profiles are at the right place.
I hope you will like my LED-Holder-Remake for the Anycubic Mega X.