BMW iX1 X1 U11 Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So i was annoyed that the original cupholder fits only big bottles so i designed this. Tested with 0,33 l + 0,5 l cans.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 329
- Wydruki
- 1
- Wyświetlenia
- 2546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Important! The floor of this model is tilted, adapted to the cup holder in the BMW.
So maybe you need to turn it until it fits
A cup holder for the BMW iX1 (U11)
I tested this only for my U11 iX1 and can not 100% confirm that it fits for all other U11 models or the new X2.
Print upside down as shown in the photo.
Settings:
Anycubic Kobra 2
Material: Sunlu PLA (I think for the future, especially the summer, i will try PETG or ASA)
Layerheight: 0,28mm (you can print it smaller if you want)
Infill: 100% (It is designed for 3 walls → 0,4 nozzle)
No support needed just print in place.
At the moment I am testing the model myself, if anyone has any suggestions for improvement please comment.
The file is version 7, as I will not be uploading my previous test models.