PiRack - 128x64 OLED Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PiRack Bay for 128x64 OLED screens Expanding on rustlerustle's PiRack design.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
PiRack Bay for 128x64 OLED screens
Expanding on rustlerustle's PiRack design, I've created a Bay that utilizes the 128x64 OLED screen.
Notes
- Currently only for the raspberry pi 4, but will upload a version for the 3 soon.
- It's a tight fit intentionally, but I can upload a looser fit if needed. If your printed isn't good with tight tolerances, some filing may be required.
- There is no button hole since those can vary wildly. I just drilled one out.
- I've uploaded the step file as well. Code to make this run
There's a ton of info for circuitpython and oled screens from Adafruit. I've written mine here that's based on Adafruit's if you're interested. It's still in dev, but the Master branch works with a push button. If you don't want a push button, try this Adafruit tutorial.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Infill:
20%
Filament:
ESun ABS Black
Notes:
Would recommend at least PETG, to prevent warping from Pi 4 Heat. Mine is printed in ABS.
Category: Electronics