Pressure washer gun holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pressure washer gun holder for Radley washers
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1051
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pressure washer gun holder. It was made for Radley 3200psi pressure washer as a replacement to the broken original holder.
Depending on the gun, I believe it could fit any pressure washer featuring a 32-35mm post. You can refer to the pictures to understand how the part works.
To use this model, you will need a minimum of two m5-40 bolts and two m5 nuts. These are used to squeeze the model to the post. It is not easy to tighten the bolts initially but this was the best design i could think of.
I hope you like it and give me some feedback - I want to know if it can be used with other pressure washers! if you have modeling skills, feel free to remix it to fit it to the post size you need