Simon Petrikov glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glasses worn by Simon Petrikov before becoming (and after stop being) the Ice King.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
Simon Petrikov glasses
Print two temples and a single frame, no supports needed. You may have some troubles printing the joint of the temples, but from 4 I printed out, only 1 turned out wrong. After printing, just snap them in place (make sure you make both ends face the same direction).
The frame has a tiny notch inside to put in some transparent plastic as glass. You'll need to cut a couple of circles of ~31mm in diameter.
Notes:
The glasses may be a bit wobbly due to clearances. Also, I had to curve the temples' ends for them to fit better behind my ears, but you can do that easily with some hair dryer. I found it better than trying to print them curved and have a nasty finish due to supports, but you may also try that if you want (Fusion 360 file attached).
Hope you like it. Cheers :)