1 / 1
HSW Bracket For La Crosse BC-1000 Battery Charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to hold the BC-1000 battery charger with countersunk holes spaced to fit the Honeycomb Storage Wall.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (2)Kolekcje (14)Powiązane
I recently started printing the Honeycomb Storage Wall and after making a tray for my batteries I wanted to mount my battery charger to the wall also. The countersunk holes are spaced for two of the M3 mounting adapters.
I printed on my Bambu Lab P1P with 0.28mm layer height on a 0.4mm nozzle.