1 / 2
Home Assistant Voice Remote case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case designed for my custom PCB that I made to be integrated in Home Assistant by the help of ESPHome.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Introduction
This model was designed as a custom case for my Home Assistant Voice Remote project.
The purpose of this project was to make a device that would be integrated in Home Assistant via ESPHome, providing the ability to send voice commands after a click of the button.
Printing
The model can be printed without any support.
I printed it with my Anycubic Vyper with a 0.2mm nozzle and PLA filament.