Bench Vise with Desk Clamp (XL) Now with soft Jaws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bench vise for bigger work pieces Swivel: https://www.printables.com/model/653728-swivel-for-bench-vice-with-desk-clamp
- Ocena
- 4,667 / 5
- Polubienia
- 175
- Pobrania
- 505
- Wydruki
- 4
- Wyświetlenia
- 3032
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a bigger vise on my desk. Couldn't find one so I made this.
printed in PET-G except for the pads (TPU). The vise and clamp are separate files as they are quite large. No support was needed for any parts.
The jaw is designed to be changable for other clamping needs.
To attach the top and bottom of the desk clamp, I used 10-32 screws (tapped the “TopClamp”)
for the vise, I used 6-32 screws to hold the “fixed” piece to the base (I tapped the four holes on the “fixed” piece
to assemble the vise and the desk clamp together, I use 8-32 screws (I tapped the “TopClamp”)
11/6/23 added soft Jaws ('C' and 'D") in TPU
Please llok for the swivel accessory: https://www.printables.com/model/653728-swivel-for-bench-vice-with-desk-clamp