Paintbrush box with brush-holding lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great print to try out printing in 2 colours! Flip the lid and use it to keep brushes from escaping.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 149
- Wydruki
- 5
- Wyświetlenia
- 651
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Total model size 202 x 182 mm
Lid 202 x 87 mm
Bottom 200 x 85 mm
Printed with a Creality Ender 3 Neo
This was our own first adventure into filament-switching during a print.
This model is very forgiving, because, even if you miss the exact layer to switch, it doesn't really show enough to matter, and you still get 2 very clear colours in the print.
Note! You will have to print the bottom of the box separately if you want it all the same colour as the lid.
If you want a box with a bottom the same colour as the lid and sides the same colour as the insides of the lid, you can print both parts at the same time and switch as you would for just the lid.
If you want to print just one colour, bottom and lid can be printed at the same time as well, of course.
There are 5 STL files:
Bottom
Lid without brush-holders
Brush-holders
Lid with brush-holders
Complete - ready-to-slice