NFC Tag Inserts - HomeKit-Style [Remix]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NFC Tag Case/Holder with more inserts based on HomeKit styling.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Excellent NFC Tag Case/Holder designed by user*ahackner*, so I took his design a step further by designing additional "Inserts" for the base. I have included his original "Base" and "Light-On + Light-Off" designs as well.
Additionally, I increased the height of the inserts to 1.4mm as the original height was extremely thin, however they still fit perfectly within the base. Please note that a bit of super glue is required to keep the insert in place - don't worry, it doesn't affect the NFC Tag's function. I also shrunk the of the inserts by a very small amount to allow the inserts to fit flush with the base's center hole.
If I design additional inserts, I will upload them here!
Happy Printing!
----------------------------------------------------------------
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
0% for Inserts / 20% for Base
Filament: eSUN PLA Any
Category: Gadgets