Reloading Trays and Powder Funnels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reloading trays and powder funnels for 9mm, .223, and .308.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 597
- Wydruki
- 5
- Wyświetlenia
- 2556
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm putting together some small batches of loads for testing, so I decided to come up with a few tools to help. I didn't need large 50 or 100 round trays (nor did I want to buy/wait for them), so I decided to draw up my own custom ones. Also needed some funnels to assist with the process so I drew some of those up as well. The funnel has a step that sits on top of the case mouth so the powder goes right in. You would think the texture from printing would catch grains, but it actually worked flawlessly, even with fine flattened ball powder.
Printed in PETG at .2mm layer height. Infill isn't critical, and no supports are needed when oriented correctly.