Magnet Insertion Jig for Pred's Parametric Gridfinity Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little jig to help with lining up and inserting magnets into the pockets at the bottom of the bins.
- Ocena
- 3 / 5
- Polubienia
- 32
- Pobrania
- 233
- Wydruki
- 2
- Wyświetlenia
- 1394
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A little jig to help with lining up and inserting magnets into the pockets at the bottom of the bins.
There is a press fit magnet spot on the top (or bottom depending on your perspective) to hold a magnet so that you can keep your magnet polarities consistent.
The magnet to be installed drops on to the side with the handles and hopefully makes it a bit easier to align with the pocket opening to slide in.
Not a super perfect thing. Did have to do some light filing to get a slip fit with the large pocket on the bottom of the bin. Also there was supposed to be a little bit of material separating the alignment magnet and the insertion magnet, but the spacing really didn't work out.