Zen Garden with Crank Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Propel the rake in a relaxing motion
- Ocena
- 4,875 / 5
- Polubienia
- 783
- Pobrania
- 920
- Wydruki
- 7
- Wyświetlenia
- 11 906
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got my inspiration from JustBaselmans thinking “Huh, what if I could turn that with a crank?"
This was an educational project to me as I'm still learning the ins and outs of Onshape.
It's not elegant, it's far from perfect, but I made it work and it's kind of relaxing.
Printed in PLA. Use very fine sand if possible.
Please tell me if tolerances are too tight. I tested everything on my Prusa.
Assembly
Glue the crank parts together. Glueing the crank and the gear to the handle is optional but recommended. I had to sand the seam on the handle a little bit down as it caused some weird friction. Assemble as shown in the picture.
(Beware: This shows the gears in motion but a prototype is shown)
