1 / 3
MMU3 Ultimulti, bear frame and 30x30 extrusion holder — zdjęcie 1
1 / 3

MMU3 Ultimulti, bear frame and 30x30 extrusion holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

remixed legs to mount Ultimulti MMU3 to 30x30 extrusions or Bear frame, inspired by original bear mounts

Ocena
4 / 5
Polubienia
15
Pobrania
98
Wydruki
2
Wyświetlenia
1122
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have to mount my MMU outside of my enclosure which means I have to mount it on a 30x30 aluminium extrusion. So I took the Ultimulti parts as guideline and designed some new holders inspired by the Bear Project “design” of the MMU2s frame holder. 

Compared to the original Ultimulti version, I improved the reset button a little bit. It can be pressed easier now due to shorter travel. And I enlarged the cutout for the usb cable.

 

Additionally I also added a version to mount the Ultimulti unit directly to the bear frame. I haven't tested this version, so feel free to test and share your feedback.

 

One issue which is also present with the original parts is the right leg/holder slightly protruding the Ultimulti body (couple tenths). Maybe also a question of tolerances of the PCB. I added a small cutout for the cap close to the reset button, but on my PCB now the molex connector is hitting the holder and still some tenths are missing :-). 

 

additional needed parts:

  • 2x M5x12mm screws and 2 T-Nuts (fitting for whatever type of extrusion you have)
  • 2x M5x10mm button head screw (ISO 7380) and Drop-in tee-nuts M5 (for bear frame)

 

Changelog:

24-05-13 / V2.0 - updated the bear_holder_right part due to an issue with the dimensions, please see the makes/comment section for more details.

23-11-05 / V1.0 - upload of inital parts

Tagi