1 / 5
HBX 16889 (Pro) battery tray (SG 1601 - SG 1602) — zdjęcie 1
1 / 5

HBX 16889 (Pro) battery tray (SG 1601 - SG 1602)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A battery tray for the HBX 16889 (Pro) and derivatives, replacing the servo mount. Creating space for a bigger battery.

Ocena
0 / 5
Polubienia
7
Pobrania
106
Wydruki
1
Wyświetlenia
766
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Update 20-02-2022 - now a variant with a stronger foot, as the first design was a little fragile

Designed this battery tray, which replaces the existing servo mount.

This allows for bigger Lipos to be installed, above the servo. (This does raise the COG somewhat).

I've run it with Turnigy 2S 1300mAh lipo, and the Ovonic 2200mAh AIR lipo also fits! https://www.ampow.com/products/ovonic-7-4v-2200mah-2s-35c-short-lipo-battery-with-deans-2pcs?variant=39435482235036

Currently two packs for only 14 euro's.

2200mAh is more than double the capacity of the original battery, and should give a very long run time.

I've been using the stock lipo strap.

Printing:

I recommend printing it on its side, which doesn't use very much supports. This gives the best strength on the thin foot.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38

Filament: Bandit3D PETG

Category: R/C Vehicles

Tagi