Iphone 15 Pro Max case - TPU supported by PLA - with Credit card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
iPhone 15 Pro Max case - TPU supported by PLA - with Credit card holder
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of PaulDirac314's case https://www.printables.com/model/592736-iphone-15-pro-max-minimalist-case.
Adding a credit card pouch at the back, plus adding a lip at the front so that case stays put when printed in TPU.
As the TPU has a 90 degree overhang and I wanted to print it on a Bambu Lab X1c - with PLA support - I actually designed a PLA insert that needs to be inserted into the print when it is a layer 50. The PLA support part can then be easily removed after the printing is complete.
NB/ This version is not compatible with MagSafe chargers or mounts. I will probably make another version with the credit card part not included or detachable.
3mf files included will only work with Bambu Studio or Orca Slicer.
Instructions
- Print PLA support section in PLA
- Slice TPU section at 0.2mm layer height and include a pause a the beginning of layer 50
- Start the TPU print
- Insert the PLA section - which should slot into the holes at the side - feel it with finger to check that the top is the same height as the TPU print
- Restart the print
- Remove print and gently pull the overlapped TPU off of the the top of the PLA support section, remove the PLA section and discard (or use for another print).