1 / 3
Feet for Delta Cycle Michelangelo gravity bike rack — zdjęcie 1
1 / 3

Feet for Delta Cycle Michelangelo gravity bike rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The feet on my Delta Cycle Michelangelo bike rack keep sliding around on my floor. This holds them in place.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The feet on my Delta Cycle Michelangelo bike rack keep sliding around on my floor. This holds them in place.

BOM
  • 2in double-sided sticky tape. I used VHB, but perhaps something thinner would work better
Printing
  • 2 feet, so print 2 copies
  • Any filament is fine
  • Pretty much any settings is fine. I used 1.2mm walls, .8mm top-bottom, and 20% cubic infill.
Usage
  • Apply double-sided tape to the bottom of the feet.
  • Put them on the floor where the rack's feet are

Tagi