One-handed DualSense Button Pushers with Icons

I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the icons separate pieces because of how bambu slicer sometimes handles colors. It was trying to only make the colors just 1 or 2 layers thick. The only work around I could think of was to make the icons separate objects, carve out holes for them to fit in the button pushers, and position them perfectly in the slicer. I thought I had already gone through the trouble of doing this, why not make this available to others? So here we are.

Adjusted colors in slicer screenshot image to better see the button pushers.

Edit:

Adding the .stl files just in case if the .3mf isn't working. I'm able to just drag all of the .stl files into bambu studio and load them as a single object with multiple parts. This places all of the pieces exactly where they need to be, the only other step is to mirror the part.

Below are the xyz positions of all of the pieces if for some reason you need them. All of the positions are from the center of the parts and before mirroring or rotating any parts. The button pushers can go anywhere, but for simplicity sake I'll position it at 100x100x10.35mm

Circle: 88.81x149.15x12.00mm

Square: 112.07x131.45x19.70mm

Triangle: 125.78x51.19x15.80mm

X: 97.18x140.52x10.00mm

And just a reminder, I did not design the icons to be printed separately and to be inserted. I intended this to be printed with an AMS or multi color system. There are no tolerances between the icons and the button pushers. If you want to try printing them separately that is all up to you to get it to work. I will not help.