Wall Bottle Holder 57mm diameter - Sriracha Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print holder designed to hold a 57mm bottle to the wall with VHB tape without any screws or else.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is an easy print with no support needed that can be used to hold bottles to the wall so you can free some areas. This was designed specifically for the Sriracha Sauce small bottle (57mm) but you can scale to other sizes.
It also has an area to hold the VHB tape so it will not be so apparent when installed.
This picture shows a print that I made at my printes with the following specs:
- Printer: Voron Trident
- Material: Esun black ABS @ 235 degC
- Layer Height: 0.25 mm
- Perimeters: 2
- Bottom layers: 3
- Top Layers: 3
- Ironing: No
Feel free to access this model and change it at the Onshape link:
https://cad.onshape.com/documents/5ceaae319ba6953958cb16e7/w/217394d168fab0bb2a2ca00b/e/04acb8db5e1ee291e2da7de8