1 / 2
API Test Tube Holder/Drying Station
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a little holder I made to hold the test tubes and caps upside down so they can dry properly.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little holder I made to hold the API Master Test Kit test tubes and caps upside down so they can dry properly. Printed in PETG. I recommend pressing the top part into the column then adding a drop of superglue to secure them.