1 / 4
9 caulk cartridges horisontal storage — zdjęcie 1
1 / 4

9 caulk cartridges horisontal storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Horisontal storage of 9 caulk cartrigdes.

Ocena
0 / 5
Polubienia
15
Pobrania
82
Wydruki
0
Wyświetlenia
568
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Based on Pitel's design for storing 9 caulk cartrigdes / tubes or similar. Changed to horizonal storage and to be printed in a pair. Thickness changes from the original 51mm to 18mm, which seems strong enough.  Added 4 wood countersunk “feet” for anchoring when placed on top of a shelf. Mounting underneet a shelf or even sideways should be possible.

This saves something like 70-90g of filament compared to the original when printed with 15% infill. Should print fine without any supports (accidentally printed with brim), and no support for the overhangs and small bridges. 
Good calibration is needed to properly print the small bridges at the top middle of the holes.
 
Can benefit from being printed in PETG, while these where printed with PLA.

Tagi