Ecotech Radion RMS clamp screw thread cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to screw onto the end of the M8 clamping bolt of the Ecotech Radio RMS light bracket
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Having made my other model - a dosing tube holder to go over the clamping bolt of the Ecotech RMS light mount, I felt that the exposed silver bolt looked unfinished. So I designed this little cover to screw on over the end of the bolt with the 22mm variant being just the right length to work with my other model - the dosing tube mount.
I'm not sure if the length will depend on people's glass thickness, but I have added a few other length variants to cover different bolt lengths needed. The lengths specified in the filenames are the thread depth inside the cover.
You will likely have to unscrew the thread cover to remove the overflow compartment cover and put it back on after refitting.
This should be sized to screw on fairly easily to the M8 bolt. Mine is printed in ABS with no scaling and is a good fit.