Gamesir X2 ClipGrip Ergonomic Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic grip for Gamesir X2 (or X2 pro) Controller that clips on.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 2774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In the quest to make the Gamesir X2 (pro) more ergonomic, this is my (probably) final release, now with a mechanism to clip the controller on to the device, no adhesive needed (this does require a pretty well tuned printer). This grip feels a lot better to hold than my last variation.
It is recommended you print the “Gamesir_Spacer.stl" from https://www.thingiverse.com/thing:5907243/files and trim it to length in your slicer to accommodate your particular phone or tablet.
Print with the clip portion flat on the bed and the handle in the air. Supports required. See screenshot of the slicer I included for reference.
Other notes: This is probably not compatible with a case unless it's pretty thin, as the clip part adds some thickness behind the usb port. This was tested using a y700 tablet, your results may vary.