3L self watering herb pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self watering pot designed to fit inside a 3L really useful box. Print and glue on legs.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 994
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A self watering pot designed to fit inside a 3L really useful box. Print and glue on legs, I found my box to not be flat in the bottom, so left off the middle leg so it sat in the box better. The middle leg isnt really needed.
Thread a strip of something absorbent through the holes in the base, making sure they are long enough to reach the bottom of the box, and up through into the soil, I used a terry towel that I cut up, and its working really well.
This is split into 2 pots and is great for growing herbs, the pot fits nicely on a wide kitchen windowsill. The lid for the box can also be put on and this creates a greenhouse effect while seeds germinate.
No supports
Printed on speed setting
Make sure bed is very clean as corners can lift due to the large flat area.
Probably printed best in PETG but I used PLA and its working just fine inside.