Nozzlebrush - Hexagon version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a nozzlebrush. Fits 30x30x3mm feltpads.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
I needed a brush that fit the pads i had access to (30x30x3mm), so i decided to create my own. Can be printed without support.
So here it is, simple design but works great. Design inspired by the hexscraper and hexagons!
Materials needed:
2x 30x30x3mm selfadhesive feltpads (wool)
Instructions:
Fold each pad in half, use the adhesive side to keep them folded together. Take the 2 folded feltpads and squeeze them into the brush. The tight fit keeps them in place when used, but can easily be changed if needed.
Print Settings
Printer: Prusa MK3S+
Material: PETG (any material should work)
Nozzle: .4mm
Resolution: .2mm
Infill: 30% (rectilinear)
Vertical Shells: 3
Horisontal Shells: min. 1mm
Support: No
Rafts: No
Notes:
Arachne perimeter generator. Designed with .4mm nozzle in mind.