Guinea pig 2 door Igloo Large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a large 2 door igloo for Guineapigs and other small animals.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a large 2 door igloo for Guineapigs and other small animals. Note you will need a printing area of 320mm x 320mm x 160 or larger to print this.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5 Plus
Rafts:
No
Supports:
No
Infill:
100%
Filament:
Transparent Blue
Notes:
I printed mine with a 1.0mm nozzle time on a E5 Plus took about 12 hours. Estimated time with a 0.4mm nozzle is a little over 2 days.
I set my z seam alignment to random
You will have to flip the igloo over in your slicer app so the top is laying on the bed.
***
I have also attached the newer version of this model labeled “Pigloov5 v4”
This model has a thicker wall and ceiling on it. It does use more filament comparably however it is more durable (not saying the older model isn't durable as I have been using that one for more than 2 years now with no issues)
***
Category: Pets