Planetary gear Bearing Planetary Gear Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extremely smooth gear bearing perfect for fidgeting and practical use!
- Ocena
- 4,75 / 5
- Polubienia
- 70
- Pobrania
- 1187
- Wydruki
- 21
- Wyświetlenia
- 3764
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds!
It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big tolerance of 0.3 mm meaning that even with bad bed leveling it will come out perfect and functioning. If, for whatever reason it sticks you can use an allen key to unstick it (around 9 mm across)
These are the different versions:
- A version without a hole in the center (0.2 tolerance)
- A version without a hole in the center (0.3 tolerance)
- A 0.3 tolerance version
- A 0.2 tolerance version
In my experience the 0.2 tolerance is better because it gives the perfect smoothness without being wobbly.
Print with normal settings or just use to g-code provided