Ender 3 V2 Upgrades: Raspberry Pi Zero 2 W case + CSI Camera Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model is designed to give a "quasi-factory" look to a regular OctoPrint setup.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1659
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The model is designed to give a better look to a classic OctoPrint setup (RPi Zero + CSI Camera).
The model provides:
- enough space to organize all the cables inside
- angled air vents for better heat dissipation
- embedded spacers to lift the RPi from the bottom of the case
- modularity, you may choose to print the RPi housing without the camera stand.
To mount the case you should reuse the 2 M5 screws used to fasten the front plate (the one holding the main board cover and fan).
In the current build, I used M2*3*3.5 brass knurled nuts and nylon screws, but it is not required as there is a ton of space for the board to rest.
To attach the camera stand you will need a knurled nut - M3*6*5 - M3*10*5 and an appropriate M3 screw.
If you like what I make and want to support the work, you can always buy me coffee :)