Star Wars TIE Advanced V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TIE Advanced V1 from Star Wars: Rebels with folding wings
- Ocena
- 4,5 / 5
- Polubienia
- 109
- Pobrania
- 637
- Wydruki
- 2
- Wyświetlenia
- 1779
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
A replica of the TIE Advanced V1 from Star Wars: Rebels. This fighter is best known for being used by the imperial inquisitors on their hunt for surviving jedi.
It has foldable print-in-place wings.
The scale is at 1:270 with a length of 14.8mm and a width of 28.9mm.
Holder uses a small base and small pin from here.
Print instructions
Printed at 0.07mm layer height with supports on buildplate only. Rotate by -90° along the x-Axis before slicing. If you want to use the holder, use the .gcode-file with peg or add a small peg before slicing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#