1 / 2
Neptune 3 plus and others RUN OUT Senseor slider
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neptune 3 plus and others RUN OUT Senseor slider
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 306
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
RUN OUT Sensor slider switch. Will slide and follow print head.
May fit other printers, push fit. Made for My Neptune 3 plus.
You may have to pull though more wire, OR add extension wire for it to reach one side.
Especially good for twin filament holders., see pics
Cura project files for convenience, IF you do not use them, then make sure the bolt has about 70% infill.
Use the screw/bolt from your Sensor.