1 / 4
Skadis Holder for the Cheap Screwdriver Set (SkadisTNut, FreeCAD) — zdjęcie 1
1 / 4

Skadis Holder for the Cheap Screwdriver Set (SkadisTNut, FreeCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A holder using which you can stick that cheap, crappy "precision" screwdriver set to your Skadis.

Ocena
5 / 5
Polubienia
8
Pobrania
34
Wydruki
2
Wyświetlenia
197
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

Most people I know do own this rather horrible “precision” screwdriver set. It somehow sneaks into every household, and I have often wondered if there is some conspiracy to be found here.

In order to at least get that thing from my desk, I decided to put in on my Skadis board. In order to do the same, you will not only have to print this part - you will also need two of the Skadis T-Nuts that make it possible to print something like this without support. Get them here and make sure to use the M2.5 version: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb

You will also need two countersunk M2.5x10 screws and two M2.5 hexnuts for mounting this. And they really have to be countersunk, the screwdrivers won't fit if you use regular ones. I got mine from this set: https://amzn.to/47ph2xt

I want to stress that those T-Nuts are really, really great. I guess I'll use them for all my Skadis stuff from now on.

Tagi