Jameson's cobra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this model is a mk3 cobra , based on a elite concept by josh "badger attack" when he worked for frontier developments.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is mk3 cobra based on a concept by Josh "badger attack" when he worked for frontier developments.
I loved his design and decided to model it , a few years later I started working on making it printable as a kit. So its finally done , its is a hard kit to print! you will need to budget about 2 weeks print time and about 2 kilos of filament, it is not easy.
If you dont like modeling this is not for you! I recommend when done , make good with sanding and a bit of filling and some spray putty , finally paint. have fun!
I have supplied the .3mf files that I used for my prusa mk3s+ these are purely supplied as a guide . my cobra turned out at 1000 percent scale about 60 cms across. this is probably the max print size for the mk3 prusa. I went with a 0.10 quality extrusion height using a 0.40 nozzle.
some of these smaller models are too detailed for a fdm, if you have a friend with a resin printer that would be a better idea.
good luck commader !