Radiomaster Boxer Max (AG-01) spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mainly a decorative spacer for the radiomaster boxer max gimbals
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1611
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
There are hundreds of spacer like this on the Internet, and I printed many but none really fit my radio and did the work I wanted to do.
The radio I have is a Radiomaster Boxer Max, which comes with AG01 gimbals.
The main thing of these spacers is just decorative.
Here's what I had in mind when designing this part:
1.-Very low profile so I don't need new screws.
2.-Enough space in the front so the AG01 can still be adjusted.
3.-Certain tolerance so is not super hard to insert/remove
4.-Not very thick so the radio can close without any problem
I printed them in PLA more because I wanted that specific orange color, but you can print it in basically any plastic. If you are doing TPU I think you want a high level of infill.
No need to re-orient the model, or anything else, just print it as it is.