Stand for Coffee Bean Vaults

Simple stand designed to hold (12) of the current Weber Workshops Polymer (aka Resin) Coffee Bean Vaults, in a 2x6 configuration. The dual-diameter holes allow inverted tubes to sit higher, providing an easy way to visually identify the empties. 

For reference, the Weber Polymer tubes this is designed for have a diameter of about 32.5mm, and the cap diameter is about 36.6mm.   This stand also works as-is with the “Tritan” material Craig Lyn Design Studios vaults as well.  Those tubes are 0.4mm smaller and the caps 0.3mm larger, so the clearance is slightly different but still works well.  

Other tube sizes may be accommodated via Slicer XY scaling, assuming your tube/cap diameter ratio is similar to the Weber's.

I designed this stand from scratch to hold a full 12 vaults in minimal counter space, while still providing enough clearance between tubes to easily grab one. The idea for the dual diameter holes came from a 5-tube design by @mkarch_256071, which can be found HERE.

I printed with 0.2 layer hieght on a MK4-IS, with 15% infill, using Prusament PETG Galaxy Black as shown in the photo.