Net Trash Container For Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the little bits of trash made when printing: Purges, Brims, Supports, alcohol pads etc..
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The Net Cover traps the stringy purge filament that would otherwise poke out everywhere.
No supports
You can use PLA
Printed Container with 0.8 Nozzle
Printed Net Cover with 0.4 Nozzle
Here is the Adhesive Foam Padding I used on the bottom of the container to reduce vibration.: www.amazon.com/gp/product
I made one for the Core One but their isn't enough space to easily fit trash(especially purge).
Whereas on the MK3/4 the net cover makes it easier to place trash
on the Core One your much better off just using a small bin with a lid.
That being said, their may be potential in making a trash container in this position.