1 / 4
MT-SYSTEM Soundbox for Cell Phones (Soundbox für Handy) — zdjęcie 1
1 / 4

MT-SYSTEM Soundbox for Cell Phones (Soundbox für Handy)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MT-SYSTEM Soundbox for Cell Phones (Soundbox für Handy)

Ocena
0 / 5
Polubienia
10
Pobrania
50
Wydruki
0
Wyświetlenia
489
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As many users like to hear their favourite music when working we designed this passive soundbox that can easily be mounted on every 20x40mm aluminium carrier profile. It is useable with cell phones with up to 13,5mm thinkness and max. 85mm width. The total width of the soundbox is 100mm. A further advantage is the little window in the bottom where you can insert your charging cable.

We recommend to print with 50-90% infill which is best for a good sound. You can hear a clear improvement of the musics quality, volume and direction. Moreover you have your phone always in sight with regard to incoming messages and calls. Hands-free talking works also very well. The soundbox is available in two versions:

Standard version: Cell phone stands 90° vertically.

Sloped version: Cell phone is sloped 10° backwards for better useability and readability etc. Also the cell phone is less shaking when tipping onto the display!

Material: PLA/PETG
Layerheight: 0,2mm
Infill: The more the better

 

HOW TO PRINT?

All MT-SYSTEM components are designed to be printed out in PLA or PETG on 02mm layer height. They are very stable but some parts like holders for heavy equipment (cordless screwdrivers) should be printed in PETG with a minimum infill of 40%.

 

WHAT IS IT ALL ABOUT?

HERE you can find ALL MODELS of the MT-SYSTEM we have launched so far.

We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. If you miss anything please let us know. We are always comitted to extend the system. Thanks.

 

MOUNTING THE MT-SYSTEM:

The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know.

Link1: https://makerteam.de/en/search?search=profile
Link2: https://makerteam.de/en/search?search=Linsenschraube
Link3: https://makerteam.de/en/search?search=slot+nut
Link4: https://makerteam.de/en/search?search=magnet

 

SPECIAL ITEMS:

The MT-SYSTEM is much more than these few parts here at Printables. If you need special equipment like battery holders for FESTOOL, MAKITA and other unique stuff please visit our webshop: https://makerteam.de/3D-Druck/3D-Produkte/MT-SYSTEM/

 

Tagi