Gutter Guard Support Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for Gutter Guard-like products when parts of the gutter are deformed and the guard doesn't reach the metal rim.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
When installing Gutter Guard-like products, sometimes the gutter has been deformed a little and the gutter cover doesn't reach across to the little rim that's provided, which is supposed to hold up the house-nearest edge of the guard product. This support bracket takes the place of the rim in holding up the guard.
Made in Tinkercad. The 3mf and the gcode print 4-up, the STL is a single support.
They don't have to be super strong as they don't get a lot of load, unless you have trees falling on your roof, in which case you have other problems. Print in PETG as PLA will eventually be dissolved by the rain :-)
Revised 2023-11-08 to remove non-needed radius on inner bar.